This is the first brand of coating products available on the market that features a complete refinishing technology for classic cars. It has been borne out of a passion by the car owners at NOVOL for the beauty of unique car bodies.
After 10 years on the market, NfCC is a brand where passion meets perfect technology. Tens of thousands of classic vehicles throughout Europe have benefited from the brand. They include absolutely peak examples of automotive engineering that feature in many European car collections. Remember that when a classic car renovation project is done and documented properly, it not only makes the vehicle a truly enjoyable thing to see, but it also significantly drives up its market value.
For NOVOL, the manufacturer and supplier of refinish coating technologies, the highest accolade and the thing we are the most proud of is that our partners at the best car renovation garages have been the co-creators of the NfCC collection. 10 years later, driven by the trust and growth in our competencies, this now provides the best lineup of products for classic car renovation.
YT Technology - Post 1980s
9 Stage System
Click below to see the step-by-step system
5 - FINAL SURFACE SCULPTING
P-S
Polyester spray filler
A polyester spray filler with the colour-shift based Mixing Indicator of polymerisation ratio. The P-S spray filler is a finish filler for the last stage of surface sculpting. The filler reduces sagging and isolates earlier layers of a filler mixed with the hardener at an incorrect ratio. The special selection of fillers and resins minimises shrinkage to 5%, providing excellent processability on large work areas. Further processing of the product’s layer is recommended after a minimum of 12–16 h at 20°C. Mixing Indicator is a visual reference for your assessment of how thoroughly the filler is mixed with the hardener to avoid component mixing ratio errors. The filler is originally sharp blue, then when mixed with the hardener the colour shifts to grey blue and, when polymerisation ends, the final colour is white.
It is natural for polyester fillers to exhibit sedimentation coupled with surfacing of a part of the resin and the dye. It is perfectly normal and common for this type of product. It is always necessary to homogenize the product by stirring it in the container before mixing with the hardener.
PROPERTIES
- Produces a smooth surface on large work areas
- Easy and quick application from a Ø2.5 mm spray gun
- Safe to apply in thick layers (up to 300 µm) without sagging
- Mixing Indicator becomes active during mixing, ensuring a good assessment of correct component blending
- Can be thinned further (up to 10% vol.)
P-S ALUMINIUM
Polyester spray filler with aluminium dust
A polyester spray filler with aluminium dust applied during the process of adapting the coating to high temperature changes (from the engine heat under a cold bonnet and in cars finished in dark colours). The specifically engineered formula contains the same aluminium fillers as the ALUMINIUM filler, ensuring that the application of both products provide the same thermal conductivity levels.
It is natural for polyester fillers to exhibit sedimentation coupled with surfacing of a part of the resin and the dye. It is perfectly normal and common for this type of product. It is always necessary to homogenize the product by stirring it in the container before mixing with the hardener.
PROPERTIES
- The aluminium content ensures very good heat removal performance
- Final sculpting of work surfaces
- Safe to apply in thick layers (up to 300 µm) without sagging
- Easy and quick application from a Ø2.5 mm spray gun
- Can be thinned further (up to 10% vol.)
© Copyright 2024. All rights reserved.
About Us | Privacy Policy | Cookies Policy | T&Cs | Website T&Cs
We need your consent to load the translations
We use a third-party service to translate the website content that may collect data about your activity. Please review the details in the privacy policy and accept the service to view the translations.